Specifications

• Spindle motor ISO30 : 1.85kW – Motor speed control from 1.000 to 12.000rpm with standard inverter

• Axes sliding X,Y,Z on linear guides with high precision

• X axis movement with servomotor and drive with toothed belt and high-pressure reducer

• Y axis driven by a servomotor with precision recirculating ball screw transmission

• CNC controlled interpolating X, Y, and Z

• Manual lever for Z-axis descent with adjustable stop and position display on the control and pneumatic servo-assisted up/down movements.

• Horizontal pneumatic clamps movable along the work table (n° 4) with dual (low and high) operating pressure and safety valves

• Automatic update of machining parameters when the tool diameter and/or length are modified

• Max tool length (from spindle end): 130mm

• Axes specifications: Axes travel X=2675mm, Y=355mm, Z=178mm

• Milling capacity: X = 2600mm, Y = 250mm, Z = 168mm

• Machinable profile can be longer than the X milling capacity (2600mm) with the option of alternate use of stops on the left and right of the machine.

• Set-up for central greasing for recirculating ball-screws and linear guides

• Suspended control console and electronic equipment, with graphic display to make the program simple and intuitive to use and an option to program a machining sequence.

• Pneumatic rotation of the work table 0°, 90° to 180°

• Work table height 850mm, adjustable between 830mm and 880mm

• Work table rotation in complete safety thanks to the selector and the dead man’s pushbutton.

• Manual tool magazine with n° 5 cone holders on the head
  

• Beam rotation stop kit for machining intermediate angles at 2 positions, manually operated (optional)
  

• Minimum quantity lubrication (MQL) with pure oil
  

• Machining operations carried out in complete safety thanks to the dead man’s handle
  

• Manually adjustable profile reference stops on right and left of machine
  

• Chip bin
  

• Adjustable feet for machine positioning and anchor brackets to fix the machine to the ground
  

• Set up for fumes extraction
  

• Power supply: 3F – 400V AC – 50Hz
  

• Total power installed: 3kW
  

• Air consumption: 24 NL/cycle
  

• Working pressure: 7 bar