Underbench Trencher
Overview
Trenching and marking of top and bottom plates, producing a neat trench for studs.
No longer do you have to hand mark your stud locations on your top and bottom plates.
Feed the timber, trench it, mark it and then build it!
Footprint
Imperial
Metric
Specifications
Imperial
Metric
| Saw motor | 4kW / 5.5hp 3 phase |
| Trenching motor | 4kW / 5.5hp 3 phase |
| Saw blade | 17 inch |
| Trenching head | 11 inch |
| Max. depth of cross cut | 4 inch |
| Max. crosscut at 90º | 4 inch height x 8 inch wide |
| Min. and max. trenching depth | 0 – 0.4 inch |
| Power requirements | 10amp, 230V, 1 phase, 25amp, 415V, 3 phase |
| Saw motor | 4kW / 5.5hp 3 phase |
| Trenching motor | 4kW / 5.5hp 3 phase |
| Saw blade | 400mm |
| Trenching head | 280mm |
| Max. depth of cross cut | 100mm |
| Max. crosscut at 90º | 100mm H x 200mm W |
| Min. and max. trenching depth | 1mm – 8mm |
| Power requirements | 10amp, 230V, 1 phase, 25amp, 415V, 3 phase |
Features
- 6m roller table, 6m automated table and a unique Spida saw that trenches & cuts
- Custom software, designed specifically for Spida
- 24” industrial fl at touch screen
Options
- Safety lanyard
- Left or right hand configuration
- Dust collector
- Ink jet marker
Innovation specialists