Component Nailer
Overview
The Spida Component Nailer is designed to accurately nail timber components together before frame assembly. The nailer will clamp and
nail one nog at a time onto a stud as required.
Footprint
Metric
Imperial
Specifications
Imperial
Metric
| Overall Width | 4ft 11in |
| Overall Length | 26ft 11in |
| Overall Height | 6ft |
| Working Height | 3ft |
| Weight | 1320 lb |
| Timber Feed | Left or right |
| Power Requirement | 10amp, 110V, 1 phase |
| Air Supply | 6-8 Bar (600-800 kPa) |
| Nail Gun Capacity | Capacity differs between gun types. See chosen gun manufacturer for further information. |
| Overall Width | 1250mm |
| Overall Length | 8210mm |
| Overall Height | 1830mm |
| Working Height | 915mm |
| Weight | 600kg |
| Timber Feed | Left or right |
| Power Requirement | 10amp, 110V, 1 phase |
| Air Supply | 6-8 Bar (600-800 kPa) |
| Nail Gun Capacity | Capacity differs between gun types. See chosen gun manufacturer for further information. |
Features
- Caters from 90mm to 190mm timber
- Nog clamps keep operator hands out of nailing area
- Safety isolation of gun firing on clamps to make sure timber is present
Options
- Left and right hand configurations
Innovation specialists