Stainless Steel Triple Grip
Overview
G11-06-00-00
Available in left and right profiles, Triple Grip are strong and economical connectors for timber joints. These pre-punched and formed stainless steel steel timber connectors are:
The economical way of achieving a strong, rigid structure.
Quick and easy to install.
Available in two profiles – Left Hand (LH) and Right Hand (RH).
More effective than skew or end nailing; and Have the necessary strength to ensure transfer of load forces across the joint.
TYPICAL APPLICATIONS
TYPICAL APPLICATIONS
Triple Grips are typically used for the following applications:
Connecting of Rafters to Wall Plate
Connecting of Roof Trusses to Wall Plate
Jack flyovers to truncated truss
TIE DOWN CAPACITY
| Joint Group | Tie down capacity (kN) per triple grip Dead Load + Wind Load |
|---|---|
| J2 | 4.3 |
| J3 | 3.1 |
| J4 | 2.2 |
| JD2 | 5.5 |
| JD3 | 4.3 |
| JD4 | 3.1 |
| JD5 | 2.5 |
NOTE: The capacities are derived from AS1720-2010 and are for uplift in houses where failure is unlikely to affect an area greater than 25m2. For primary elements in structures other than houses or elements in a house for which failure would be greater than 25m2 these capacities must be multiplied by 0.94. For primary joints in essential services or post disaster buildings multiply by 0.88. For 2/Triple Grips the table values can be doubled.
FIXING
A minimum of 10/30mm x 2.8Ø Multinail stainless steel nails must be used to fix each Triple Grip for full tabulated values.
DESCRIPTION AND PACKAGING
Manufactured from 0.9mm Minimum Grade 316 Stainless Steel
| Description | Product Code | Reference Code | Carton quantity | Carton kg. |
|---|---|---|---|---|
| Left Hand | STGL | STGL | 1 | |
| Right Hand | STGR | STGR | 1 | |
| 30mm x 2.8Ø Multinail Stainless Steel Nails (SN30280) | ||||
Innovation specialists