Strong timber connector for fixing large timber purlins and battens to trusses and rafters. Pre-punched and formed galvanised steel connectors that are:
Easy to install and provide an effective method of fixing large timber purlins to timber roof trusses or rafters.
|Fixing per leg||Allowable wind load per purlin tie (kN)|
|Unseasoned Timber||Seasoned Timber|
*Values in the table are for ONE 40mm or 80mm Purlin Cleat only
Fixing procedure with nails
Fixing procedure with teeth
NOTE: The capacities are derived from AS1720-2010 and are for uplift in houses where failure is unlikely to affect an area greater than 25m2. For primary elements in structures other than houses or elements in a house for which failure would be greater than 25m2 these capacities must be multiplied by 0.94. For primary joints in essential services or post disaster buildings multiply by 0.88. For 2/Purlin Tie the table values can be doubled.
Manufactured from 1.0mm Galvanised G300 Z275 Steel
|Description||Product Code||Reference Code||Carton quantity||Carton kg.|
|With nail holes 70mm||TA99||PTN70||200||13.5|
|Without nail holes 70mm||TA991||PTWH70||200||13.5|
|With Teeth 70mm||TA993||PTT70||100||7.1|
|With Teeth 90mm||TA994||PTT90||100||7.1|
|35mm Green Tip #12 Screw (TA221)|