Purlin Tie (NT)
Overview
G08-05-02-00
Strong timber connector for fixing large timber purlins and battens to trusses and rafters. Pre-punched and formed galvanised steel connectors that are:
Easy to install and provide an effective method of fixing large timber purlins to timber roof trusses or rafters.
For Northern Territory use only.
APPLICATION - For Northern Territory use only
| Number of nails | Strength limit state design load (kN) |
|---|---|
| Timber Joint Group | |
| J2/JD3 | |
| 3 Nails | 2.7 |
Fixing procedure with nails
- Fix purlin batten to truss or rafter with 2/75mm x 3.05Ø nails.
- Nail both ends of purlin tie to truss or rafter for capacity required.
- Provide 2 purlin ties at purlin splices.
- Use 3/30mm x 2.8Ø Multinail nails to each leg.
NOTE:
- Capacity from Low High Low cyclone testing as specified in the BCA for inclusion in the northern territory deemed to comply manual (DTCM)
- This bracket has been tested by James Cook University at the Cyclone Testing Station. Report No. TS725.
DESCRIPTION AND PACKAGING
Manufactured from 1.0mm Galvanised G300 Z275 Steel
| Description | Code | Carton quantity | Carton kg. |
|---|---|---|---|
| With nail holes 70mm | TA99 | 200 | 13.5 |
| Without nail holes 70mm | TA991 | 200 | 13.5 |
| 30mm x 2.8Ø Multinail Nails (TA302) | |||
Innovation specialists