Wall Stacker
Overview
Automated lifting, moving and stacking of finished wall frame sections at the end of a nailing line.
Footprint
Metric
Imperial
Specifications
Imperial
Metric
| Overall Width | 7ft 5in | |
| Overall Height | 1ft 7 in – 6ft 7in | |
| Overall Length | 26ft 11in | |
| Maximum Wall | 19ft 8in | |
| Weight | 3500lb | |
| Operational Noise | 40 dB | |
| Air Supply | 85 PSI | |
| Hydraulic Oil | 18.5 gal | |
| Electrical Supply |
|
| Overall width | 2250mm |
| Overall height – customisable | 470mm – 2000mm |
| Overall length | 8200mm |
| Maximum wall | 6000mm |
| Weight | 1600kg |
| Operational noise | 40dB |
| Air supply | 6 Bar |
| Hydraulic oil | 70L |
| Electrical supply | 3.75kW, 380-480V, 50-60 Hz, 6amp |
Features
- Automated lifting and stacking of frames eliminates operator fatigue and lifting injuries
- Centering positioning – Reversible drive to centre the bundle as you stack
- Designed to handle 200kg frames with ease
- Operator control station removed from lifting area
- Side chains to progress frame over the lifting device
- Stopper pins on infeed side of machine to prevent the next frame entering the lifting area
- Sensors to prevent overrun
- Toothed safety mechanism on lifting ram to prevent lifter falling should the hydraulics fail
Options
- The Wall Stacker can be made to match your existing outfeed height, common sizes vary from 470mm –
870mm - Ideally setup with a Chain Conveyor on the infeed and a Wall Stacker on the outfeed
Innovation specialists