The Wall Extruder is designed to assemble wall frames from precut timber components. The length stops on the infeed set the plate position relative to the stud being nailed in. After a stud is nailed in, the progressors will index through to the next stud position, this repeats until the frame is finished.
|Wall height||6ft – 12ft|
|Nailing cycle time||3 seconds|
|Air supply required||100 – 110 PSI|
|Timber widths||2×4, 2×6, 2×8|
|Max Panel Length||19ft 8in|
|Power Requirements||15amp, 120v, 1 phase|