PieceMaker
Overview
The PieceMaker is an automated Linear Saw that will cut, print and handle the timber you need for your truss, wall and floor manufacturing requirements. It can cut your standard and custom mitres, birdsmouths, raking plates and studs, low angles, long cuts, large timber sections and all your normal standard cutting.
It’s the manufacturing centre that every truss plant needs.
Footprint
Metric
Imperial
Specifications
Imperial
Metric
| Cutting heads | 1 |
| Motor size | 7.5hp |
| Blade size | 17.7in carbide tipped |
| Infeed conveyor | 19ft 8in (L) x 13ft 4in (W) |
| Outfeed conveyor | 26ft 3in (L) x 9ft 2in (W) |
| Weight | 10000lb approx. |
| Power requirements | 63amp, 415v, 3 phase +N +E |
| Max. depth of cut | 3.9in |
| Min. finished length | 0.04in |
| Max. finished length | 19ft 8in |
| Timber height range | 1.4in – 3.94in |
| Timber width range | 2.76in – 15.75in |
| Minimum mitre angles | 15° |
| Minimum cut angle | 2° |
| Cutting heads | 1 |
| Motor size | 7.5hp |
| Blade size | 450mm |
| Infeed conveyor | 6230mm(L) x 4060mm(W) |
| Outfeed conveyor | 8581mm(L) x 2800mm(W) |
| Weight | 4600kg approx. |
| Power requirements | 63amp, 415V, 3 phase +N +E |
| Max. depth of cut | 100mm |
| Min. finished length | 1mm |
| Max. finished length | 6000mm |
| Timber height range | 35mm -100mm |
| Timber width range | 70mm – 400mm |
| Minimum mitre angles | 15° |
| Minimum cut angle | 2° |
Features
- Supports all data down loads from all the major software suppliers
- File formats (or supplier files) including but not limited to: MWF, SSF, TRS v2 and v3
- Operational software simple to use and train
- Easy to calibrate
Standard Features
- Dust extraction system
- Includes waste conveyor
- Ink jet timber printer
- Spares kit
Options
- Left or right hand feed
- Safety fencing
Innovation specialists