Mitre Saw
Overview
The Mitre Saw is designed to perform a double mitre cut on the end of timber components that are angled between 0° – 45°.
Footprint
Imperial
Metric
Specifications
Imperial
Metric
| Overall width | 5ft 2in |
| Overall height | 4ft 9in |
| Overall length | 5ft 4in |
| Working height | 2ft 8in |
| Weight | 1323lbs |
| Operational noise | 92.8dB (free running) 98.1dB (working) |
| Timber feed | Front |
| Air supply | 6-8 Bar (600-800kPa) |
| Max. height of timber to be cut | 1.8in |
| Max. width of timber to be cut | 7.5in (or 2x pieces of 3.7in) |
| Angle of mitre cut | 0 – 45° |
| Saw blade | 5.4in Dia |
| Saw arbor | 1.5in Dia |
| Arbor motor | 7.5kW / 10hp 12.60amp full load current 2900rpm 3hp, 415V, 50Hz |
| Power requirement | 25amp, 480V, 3 phase |
| Overall width | 1574 mm |
| Overall height | 1454 mm |
| Overall length | 1636 mm |
| Working height | 824 mm |
| Weight | 600kg |
| Operational noise | 92.8dB (free running) 98.1dB (working) |
| Timber feed | Front |
| Air supply | 6-8 Bar (600-800kPa) |
| Max. height of timber to be cut | 45 mm |
| Max. width of timber to be cut | 190mm (or 2x pieces of 95mm) |
| Angle of mitre cut | 0 – 45° |
| Saw blade | 138mm Dia. |
| Saw arbor | 38mm Dia. |
| Arbor motor | 7.5kW / 10hp 12.60amp full load current 2900rpm 3hp, 415V, 50Hz |
| Power requirement | 25amp, 480V, 3 phase |
Features
- Single pass double mitre saw that removes operator from cutting area
- Foot switch operated for maximum flexibility
- Manual angle setting with pneumatic position locking
- 5mm insert plate for quick change to 35mm components
- Vertical and horizontal clamps to hold timber whilst mitre is cut
- Robust linear slide and slew ring mechanical components
- Rear dust removal point
- 2x roller stands
- Easy installation
Options
- Additional blades
- Single roller support stands
- Left or right hand configuration
Innovation specialists