3 Head Nog Nailer
Overview
The 3 Head Nog Nailer is designed to accurately nail timber components together before frame assembly. The nailer will clamp and nail up to three nogs/blocks onto a stud in one action.
Footprint
Metric
Imperial
Video
Specifications
Imperial
Metric
| Overall width | 5ft 1in |
| Overall height | 3ft 11in |
| Overall length | 10ft |
| Working width | 2ft 7in |
| Weight | 1120lb |
| Operational noise | 92.8dB |
| Timber feed | Left or right |
| Air supply | 7-8 Bar |
| Nail gun capacity | 273.8 l/min (60 cycles) each |
| Minimum nog spacing | 420mm |
| Overall width | 1570mm |
| Overall height | 1185mm |
| Overall length | 3065mm |
| Working width | 788mm |
| Weight | 510kg |
| Operational noise | 92.8dB |
| Timber feed | Left or right |
| Air supply | 7-8 Bar |
| Nail gun capacity | 273.8 l/min (60 cycles) each |
| Minimum nog spacing | 420mm |
Features
- Two hand control for maximum operator safety
- Safety isolation of gun firing on clamps to make sure timber is present
- One step operation for maximum efficiency
- Front shield installed for added safety and protection for everyone in the factory environment
- Adjustable for 70mm and 90mm timber
- Individual gun isolation
- Pneumatic braking of trolley position
Options
- Left or right hand configurations
- Left or right adjustable stud stop
Innovation specialists